Black Friday Fleet Upgrade Event15% Off for 3 Months + 24h Data ImportAutomate dispatch, simplify PODs, and get paid faster.Ends in

Trucking Today

Saturday, November 21, 2026

How to get your NSC number and Safety Fitness Certificate in Alberta

Alberta has no CVOR. New Calgary and Edmonton carriers get their NSC number by earning a Safety Fitness Certificate. Here's each step, in order.

By Trucking Today Staff

Published November 20, 2026 · 7 min read

How to get your NSC number and Safety Fitness Certificate in Alberta

Key points

  • Only Ontario issues a CVOR. In Alberta you need a Safety Fitness Certificate, and your NSC number comes with it.
  • Steps: online course (6 modules, 6–8 hours), test at a registry, register your truck, then apply online.
  • Trucks over 4,500 kg that leave Alberta need Federal status. Alberta-only trucks need a certificate at 11,794 kg or more.
  • Renew every 3 years, within 45 days of expiry. The renewal fee is $123 as of November 2026.

Only Ontario issues a CVOR (Commercial Vehicle Operator's Registration). Alberta uses a Safety Fitness Certificate (SFC) instead, and your National Safety Code (NSC) number comes with it. To get both, you finish Alberta's Pre-Entry Program: an online course, a knowledge test at a registry office, registering your truck, and an online application.

The good news is that the steps are clear, and you can do most of them from your kitchen table. This guide walks through each one in order. It also shows how to set up your records now so your first audit is an easy day.

CVOR, NSC, SFC: what each name means in Alberta

People search "CVOR Alberta" because Ontario's term is the best known. Here's what each name means:

  • NSC (National Safety Code): A set of minimum safety standards for drivers, vehicles and carriers. The Canadian Council of Motor Transport Administrators (CCMTA) writes the standards. Every province and territory builds its truck safety rules on them.
  • NSC number: Your carrier ID. CCMTA says the province where your vehicle is plated issues it. CCMTA does not issue NSC numbers or keep records of them. If your trucks have Alberta plates, Alberta issues your number.
  • SFC (Safety Fitness Certificate): Alberta's permission to run commercial vehicles. Alberta says you must have one before you start operating, and running a commercial vehicle without one is an offence.
  • CVOR: Ontario only. If your trucks are plated in Alberta, you don't need one.

Plating in another province? Our NSC number guide for every province covers each one.

Who needs an Alberta Safety Fitness Certificate

It depends on two things: how heavy your truck is registered for, and where it runs. Alberta calls this your operating status. You'll pick one of two when you apply: Provincial or Federal.

Provincial operating statusFederal operating status
Where you runOnly inside AlbertaMore than one province, territory or state
Trucks that need an SFCRegistered for 11,794 kg or moreRegistered for more than 4,500 kg
Buses that need an SFCBuilt to seat 11 or more, including the driverBuilt to seat 11 or more, including the driver
ExemptionsFarmers hauling their own goods on farm platesNone
Hours of service rulesAlberta Drivers' Hours of Service RegulationCanada's Commercial Vehicle Drivers Hours of Service Regulations
Typical workCalgary–Edmonton runs on Highway 2, local gravel and construction haulsRuns into B.C. or Saskatchewan, or south through Coutts into Montana

Pick the status that fits where your trucks will actually go. Plenty of new Hwy 2 carriers start inside Alberta. Then a customer asks for a run to Saskatoon or Kamloops. If you go provincial now and expand later, you'll need to apply to change your certificate. If you already know you'll cross a border, start with Federal.

Operating status also decides which hours of service (HOS) rules your drivers follow. HOS rules set how long a driver can drive and work before resting. See when Alberta, BC or Ontario HOS rules apply.

Step by step: your SFC and NSC number

Alberta's Pre-Entry Program is the path for every new carrier. Here it is in order.

1. Choose your "appropriate individual"

Alberta asks one person, the "appropriate individual," to take the knowledge test for your company. Choose the person who will really run safety day to day, such as the owner, a partner or your safety lead. That person should take the course too.

2. Take the SFC Compliance Course online

The course has 6 modules and takes about 6 to 8 hours. It's on Alberta's commercial carrier training site. It covers the rules you'll follow every day, including carrier safety practices and how your carrier profile works.

When you finish, save the completion certificate to your computer. You'll upload it with your application. The course and the test are only offered in English.

Tip: break the course into two or three evenings. Take notes on anything about driver files and vehicle maintenance, because you'll use them right away in your own programs.

3. Pass the SFC Knowledge Test at a registry

The knowledge test covers what the course teaches. Your appropriate individual takes it in person at an Alberta registry office and brings Alberta-issued ID, like a driver's licence. Use Alberta's registry agent finder to find an office near you in Calgary, Red Deer, Edmonton or anywhere else.

4. Register your truck

Register your commercial vehicle at an Alberta registry office. Write down the MVID (motor vehicle identification) number on the registration document, because the application asks for it.

Registering the truck does not mean you can haul with it yet. You still need the certificate first.

You'll also need insurance that meets Alberta's Commercial Vehicle Certificate and Insurance Regulation. Talk to a commercial trucking insurance broker early. Quotes for new carriers can take time.

5. Apply online

Next, fill in the Safety Fitness Certificate application for new carriers. Alberta's new carrier fact sheet says you'll need:

  • Your course completion certificate
  • Whether you'll operate outside Alberta (your operating status)
  • Confirmation that you have a safety and maintenance program

You'll also give your insurance details and pay the application fee online. Fees change, so check the current amount on the application page before you submit.

Write your safety and maintenance programs down before you apply. A simple binder or shared folder works. It should cover driver hiring and files, hours of service, trip inspections, and a maintenance schedule for each unit.

6. Get your certificate and NSC number

Alberta reviews your application and issues the certificate once it's approved. The certificate is electronic only. You get it through Alberta Transportation's Online Services, in the Carrier Document Portal, so you'll need an account.

Your NSC carrier number is at the top of the email telling you the certificate was issued. Save that email. Renewal reminders and other notices about your SFC also come through Online Services, so check it often.

Alberta's SFC information package tells carriers to keep a copy of the certificate in the vehicle. Put one in every cab.

Renewing every three years

An Alberta SFC isn't permanent. Alberta's certificate page says:

  • You renew online, before your certificate expires, and only within 45 days of the expiry date.
  • The renewal fee is $123 as of November 2026.
  • A renewed certificate lasts up to 3 years.
  • You confirm your insurance and your operating status again.

Set two calendar reminders: one 60 days before expiry so you can gather your papers, and one at 45 days, when the renewal window opens. Missing the window can park your trucks, so it's worth a few minutes now.

Your carrier profile: the report card shippers can see

Alberta keeps a carrier profile for every carrier running NSC vehicles plated in Alberta. It's a record of your safety on the road. Alberta's guide, Your Carrier Profile: How to Review It, explains:

  • The profile has 12 parts, and some only show up if you ask for them.
  • A standard report covers the last 12 months. You can ask for any period back to January 2010.
  • There are five safety fitness ratings: Excellent, Satisfactory, Satisfactory Unaudited, Conditional and Unsatisfactory.
  • If you can show good reason, you can ask Alberta to review a collision and possibly remove its points from your profile.

To get your profile, log in to Online Services, open the Carrier/Public Profile & Carrier Document Portal and click "Request a Carrier Profile." Alberta also offers public profile reports to companies and individuals who ask. That means shippers and brokers can check how safe you are before they give you freight.

Here's the upside. A clean profile helps you win freight against bigger carriers. Pull yours every quarter so nothing on it surprises you.

Once you've been running a while, look at Alberta's ACES program (Alberta Carrier Excellent Safety). To qualify, you need an Alberta SFC, commercial vehicles registered for the past 12 months in a row, and a record that meets Alberta's safety performance criteria. It's a good target for your second year.

What about the Alberta Operating Authority Certificate?

If you haul freight, you can skip it. Alberta exempts commercial trucks from the Operating Authority Certificate, and drivers no longer have to show one at a roadside inspection.

Today it's only for companies that carry passengers, such as charter, scheduled, private, industrial or bus services. Those carriers still need a Safety Fitness Certificate if a vehicle seats 11 or more people, including the driver.

Set up your records on day one

Getting the certificate is a one-time job. Staying compliant happens every week. Carriers that set up good files from the first load have a much easier time when an auditor calls. Here's a simple starting list:

  • Driver files: licence, abstracts, medicals, training records and hire date. A commercial driving record abstract is a standard registry product.
  • Expiry dates: driver licences, medicals, insurance, plates, annual inspections and your SFC itself.
  • Vehicle records: inspections, defects found, repairs and maintenance for each truck and trailer.
  • Hours of service logs: stored so you can pull any driver's logs on request.
  • Carrier profile copies: saved every quarter, with notes on anything you're disputing.

Spreadsheets and a phone full of photos will work for your first truck, but they get messy quickly. TorqueAI keeps driver files, document expiries, inspection and maintenance records, and audit paperwork in one place from your first day. It warns you before anything lapses. It's set up for your fleet size and your home base, whether you run 1 truck or 500+. See how small Alberta fleets use it on our TMS for small trucking companies page.

For business registration, insurance and finding your first customers, read our full guide to starting a trucking company in Canada.

Welcome to the road. Alberta needs good carriers, and with these steps done, you're set up to be one.

Questions readers ask

Do I need a CVOR to run trucks in Alberta?+

No. CVOR is Ontario's certificate, and only Ontario issues it. If your trucks are plated in Alberta, you need an Alberta Safety Fitness Certificate. Your NSC number is issued with it.

How do I get an NSC number in Alberta?+

Finish Alberta's Pre-Entry Program. Take the online Safety Fitness Certificate Compliance Course, pass the knowledge test at an Alberta registry office, and register your commercial vehicle. Then apply online for a Safety Fitness Certificate. Your NSC carrier number is at the top of the email you get when the certificate is issued.

How much does an Alberta Safety Fitness Certificate cost?+

As of November 2026, Alberta lists the renewal fee at $123, and a renewed certificate lasts up to 3 years. New carriers pay an application fee online when they apply. Fees change, so check the current amount on the application page before you submit.

Do trucking companies need an Operating Authority Certificate in Alberta?+

No. Alberta exempts commercial trucks from the Operating Authority Certificate, and drivers no longer need to show one at a roadside inspection. It's now only for passenger services like charter, scheduled and bus operations. Those carriers also need a Safety Fitness Certificate if a vehicle seats 11 or more people.

How do I get my Alberta carrier profile?+

Make an account on Alberta Transportation's Online Services. Open the Carrier/Public Profile & Carrier Document Portal and choose 'Request a Carrier Profile'. By default the report covers 12 months, but you can ask for any period back to January 2010.

More from Trucking Today