Fuel receipts to payroll: how small fleets automate fuel card expenses
One fill-up touches your books, your IFTA return, your driver's settlement and your profit numbers. Here's how to enter it once and let it flow.

Key points
- Fuel averaged about 48 cents a mile in 2025, per ATRI. It's a large cost, so it's worth automating first.
- For IFTA, a fuel record needs the date, seller, gallons or litres, fuel type, price and the truck it went into.
- Keep IFTA fuel and distance records for at least four years after the return was due or filed.
- Fuel deductions from driver pay must be in the lease for owner-operators and can't push employees below minimum wage.
To automate fuel card expense tracking, pull your transactions straight from the fuel card company instead of typing in receipts. Then link every purchase to a truck and a driver, and send that one record to your books, your IFTA file and your driver settlements. If you enter it once and use it everywhere, fuel stops being a weekend paperwork job and becomes a 15-minute weekly check.
This guide covers what each fuel record needs, the rules for taking fuel off driver pay, and a simple weekly routine that works whether you run 1 truck or 500.
Fuel is the expense worth fixing first
Fuel is one of your largest costs, and it comes in as dozens of small purchases every week. That mix of big money and lots of transactions is exactly where manual work breaks down.
ATRI's latest cost study, reported by FleetOwner, puts the average fuel cost at about $0.48 per mile in 2025, out of a total operating cost of about $2.34 per mile. That means roughly one dollar in five you spend running a truck goes into the tank.
Here's what that looks like for a small fleet. These are example numbers, not a benchmark:
- 5 trucks × 2,500 miles a week = 12,500 miles
- 12,500 miles × $0.48 = about $6,000 in fuel every week
- If each truck fuels 3 times a week, that's 15 transactions a week, or close to 800 a year
Each of those 800 transactions needs to be filed with the right truck and checked against the right driver, and some get deducted from someone's pay. Doing it by hand is how a $400 fill-up ends up on the wrong truck or gets left off a settlement.
One fill-up, four jobs
A single diesel purchase has to show up in four places:
- Your books. It's a business expense, and your accountant needs it categorized correctly. The IRS's Publication 583 explains that receipts, invoices and statements are the supporting documents behind every number in your books.
- Your IFTA return. IFTA is the fuel tax report you file every quarter. It needs gallons or litres by jurisdiction, matched to the miles each truck drove.
- Your driver settlements. If an owner-operator pays for their own fuel, or a driver bought something personal on the card, it has to come off the right settlement in the right week.
- Your profit numbers. Fuel is the biggest variable cost on a load. If it sits in a pile of receipts until month-end, you can't see real profit per truck or per lane.
When these four live in four different places (a shoebox, a spreadsheet, QuickBooks and a payroll sheet), the same fill-up gets typed in three or four times. Every extra entry is another chance for a typo. The fix is one record that feeds all four.
What a fuel record must show for IFTA
IFTA auditors don't need the paper receipt itself. They need the information on it. Iowa DOT's IFTA record-keeping page lists a seller's receipt, invoice or transaction listing, a credit card receipt, or an electronic copy of the original receipt as acceptable proof for road fuel.
To claim credit for tax you've already paid at the pump, the record should show:
- Date of purchase
- Seller's name and address
- Number of gallons or litres
- Fuel type
- Price per gallon or litre, or the total sale
- The truck (unit number) the fuel went into
- The purchaser's name
That list comes from the Virginia DMV's IFTA record-keeping requirements, and other states and provinces ask for much the same thing. Good news if you lease your trucks: Virginia notes that the receipt can be in the name of either the lessor or the lessee, as long as it can be clearly linked to the carrier filing the return.
How long to keep it: Iowa says to keep fuel and distance records for four years after the return was due or filed, whichever is later. If your files are digital and searchable, an audit request is a quick lookup, not a hunt through the back office.
The most common gap on fuel card data is the unit number. If a driver swaps trucks and keeps the same card, the purchase can land on the wrong unit, and both trucks' IFTA numbers end up wrong. That's why mapping matters so much (more on that below).
Three ways to get fuel data into your system
| Method | How it works | IFTA-ready? | Catches problems | Best for |
|---|---|---|---|---|
| Paper or photo receipts | Driver keeps the slip or texts a photo, and someone types it in | Only if every field gets copied over correctly | Weeks later, if at all | Cash or one-off purchases off the card |
| Statement import | Export the card company's transaction file (usually a spreadsheet) and upload it | Yes, if unit numbers are on the card or mapped | Weekly, before settlements | Fleets that close fuel once a week |
| Direct feed | Transactions flow in automatically from the card provider, usually every day | Yes, with card-to-truck mapping | Same day or next day | Fleets that want daily cost and profit numbers |
Most fleets end up using a mix. The card feed or import handles 95% of purchases, and photo receipts cover the odd cash fill or roadside repair.
If you're choosing a card or already have one, check which ones connect directly. For example, EFS and Comdata are common with US carriers, and Petro-Canada is common with Canadian and cross-border fleets. TorqueAI connects with these and other fuel card providers, so transactions land on the right truck without anyone retyping them.
Mapping: the step that makes or breaks it
Pulling in transactions is the easy part. The real time-saver is setting rules once so every line sorts itself. Set up these four things:
Card → truck. Link each card to a unit number. If your cards are tied to drivers instead, link card → driver → the truck that driver is on that day. That second link is where dispatch and fuel need to share data.
Card → driver. This decides whose settlement a purchase goes to. Without it, someone has to guess.
Product codes → categories. Fuel cards tag each line with a product type. Sort them so that:
- Tractor diesel goes to fuel expense and IFTA
- Reefer fuel goes to its own line, so it doesn't throw off your truck's fuel economy or your IFTA numbers
- DEF goes to its own expense line
- Cash advances go to the driver's account to be paid back
- Snacks, showers and other non-fuel items get flagged for review
Purchase → load. If you know which load the truck was on, the fuel cost goes onto that load. That's how you see real profit on every trip instead of waiting for an end-of-month guess.
Once these rules are set, a new transaction needs no thought. It comes in, gets sorted and goes where it belongs.
Fuel deductions on driver pay: know the rules
Taking fuel off a driver's pay is normal, especially with owner-operators. But the rules depend on who the driver is, so set it up correctly from day one.
Leased owner-operators (US)
Federal leasing rules cover this. Under 49 CFR 376.12(h), the lease must clearly list every item the carrier may pay up front and later take out of the owner-operator's pay, along with how each amount is calculated.
In plain English:
- Fuel has to be listed in the lease as a chargeback.
- The lease has to say how it's calculated. For example, is it the pump price, the discounted card price, or something else?
- The owner-operator gets to see the documents behind each charge.
That last point is a good reason to automate. If each fuel line on a settlement links back to the real card transaction (date, location, gallons, price), the driver can check it in seconds. Clear settlements build trust, and drivers who trust their pay tend to stay.
Employee drivers (US)
For company drivers, fuel for the truck is your cost. Deductions usually only come up for personal purchases or cash advances on the card. Under federal wage law, the US Department of Labor's Fact Sheet #16 explains when deductions are allowed. As Indiana's labor department puts it, deductions can't bring an employee's wages below minimum wage or cut into required overtime pay. Many states have stricter rules, so check your state before you deduct.
Canada
Each province sets its own rules for deducting from employee pay, and many require the employee's written permission. Check your provincial employment standards rules, and have drivers sign a fuel card policy that spells out what counts as a personal purchase.
A simple fuel card policy covers most problems
- What the card may be used for (tractor fuel, DEF, approved reefer fuel)
- What counts as personal, and how it's paid back
- Cash advance limits and how they're repaid
- That every deduction will show on the settlement with the transaction details
A weekly fuel routine that fits before settlements
You don't need a month-end scramble. Run this every week, the day before you pay drivers:
- Pull the week's transactions from your card feed, or import the statement.
- Check the unmatched list. Any line without a truck or driver gets fixed now, while people still remember who was driving what.
- Review the flags. Look at non-fuel items, unusual amounts, two fill-ups close together on the same truck, or a purchase far from where the truck's ELD says it was.
- Add the stragglers. Enter cash fills or off-card receipts from driver photos.
- Post to settlements. Approved deductions and advance repayments go onto each driver's pay statement automatically.
- Glance at the numbers. Check fuel cost per mile for each truck this week. If one unit jumps, look into it now (idling, a route change, or a maintenance issue) instead of finding out at year-end.
Do this every week and your IFTA quarter is mostly done before it starts. Gallons by jurisdiction are already sorted by truck and matched to ELD miles, so filing becomes a review, not a rebuild.
This is the kind of fuel accounting TorqueAI is built to take off your plate. Fuel transactions, ELD miles, settlements and your books all live in one system, so a fill-up in Ohio shows up on the right truck, the right load, the right IFTA line and the right driver's pay without anyone retyping it. If driver pay is the part keeping you up at night, here's how trucking payroll and settlements fit together.
Questions to ask before you choose a setup
Whether you're adding a fuel card, switching cards, or connecting your card to your back office, ask:
- Does the card connect directly, or is it export-only? Both work. Just know which one you're getting.
- Do transactions carry a unit number? If not, can you link cards to trucks on your side?
- Are product codes broken out? Diesel, reefer fuel, DEF and merchandise should each come through separately.
- Can you see both the discounted price and the pump price? This matters for owner-operator chargebacks and for knowing your true cost.
- Does it handle both gallons and litres, and US and Canadian dollars? If your trucks cross the border, this matters.
- Who fixes a mismatch, and when? Pick one person and one day each week.
Fuel will always be a big number. With one clean record per fill-up, it's also a number you can trust, and that makes every other number in the business easier to trust too.
Questions readers ask
How do I track fuel card expenses for a small trucking company?+
Pull transactions straight from your fuel card provider with a direct feed or a statement export instead of typing in receipts. Link each card to a truck and driver so every purchase lands on the right unit. Then sort each line by type (diesel, DEF, reefer fuel, cash advance, other) and send it to your books, your IFTA records and your payroll. Do this every week before driver settlements.
Can I deduct fuel from my driver's paycheck?+
It depends on who the driver is. For leased owner-operators in the US, federal leasing rules say the lease must list every chargeback, like fuel, and explain how each amount is worked out. For employee drivers, US federal law says deductions can't drop pay below minimum wage or cut into overtime. Many states and Canadian provinces have stricter rules, so check yours before you start.
What does a fuel receipt need to show for IFTA?+
IFTA (the fuel tax report you file every quarter) needs the purchase date, the seller's name and address, the gallons or litres, the fuel type, the price per gallon or total sale, and the truck the fuel went into. A transaction listing from your fuel card company or a digital copy of the receipt is acceptable. Missing truck numbers are the most common gap, so link cards to units.
How long do I need to keep fuel card statements and receipts?+
For IFTA, keep fuel and distance records for four years after the return was due or filed, whichever is later. Because of how filing dates and audits line up, that can stretch past five years in practice. Digital copies count, so keep them in one searchable place instead of shoeboxes.
Is a fuel card statement import good enough, or do I need a live feed?+
A statement import (a weekly or monthly spreadsheet export from your card company) works well if you run it every week before payroll. A direct feed brings in transactions daily, so you can catch odd purchases while the truck is still on the road. Either beats typing in paper receipts, as long as every card is linked to a truck and driver.



